Descargar Imprimir esta página

Avanti NIMD3313S-IS Manual De Instrucciones página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Water Bin: Used for storing water.
2. Ice Window: Allows you to check how much ice has been produced without having to open the
top and letting warm air in.
3. Air Vents: Located on the back and sides of the unit, these vents help prevent the ice maker
from overheating. Please leave at least six inches of space all around the unit for proper
ventilation.
4. Water Drain: Allows you to empty the water from the tank easily.
5. Max Fill Line: Inside the water tank below the ice tray is a line marking labeled "MAX". Do not
fill the water tank above this line.
 Controls/Indicator Lights:
STANDBY MODE
Once you plug in your ice maker, three red LED rings will light up to
indicate the unit is waiting to produce ice. It will not make batches until
the unit has been activated with the power button.
POWER BUTTON
Press the power button once to turn on your ice maker. Once on, a blue
LED ring will light up and the unit will begin to make ice. To turn the unit
OFF, hold the power button for 3 seconds. The red LED ring will light up
and the ice maker will to back to standby mode.
DISPENSE
Press "DISPENSE" button and hold on during any mode, "ice out" light flicker and ices come out
after 2 seconds.
ICE FULL
There is an infrared sensor that helps detect when the ice tray is full. When the tray is full, ice
production will be kept on 20 minutes, then the ice machine will show to "ice full", the unit will turn
off, and the "Ice Full" indicator will light up. To restart the ice production process, empty the ice
basket, and machine will restart the ice production automatically.
ADD WATER
When the "Add Water" indicator light up, the unit will turn off and you will need to pour more water
into the water tray below the ice basket. After you have refilled the water tray, press the power
button once to restart the ice production process. The unit will continuously produce ice if there is
water in the tank and the ice tray is not full.
GETTING TO KNOW YOUR ICE MAKER
OPERATING YOUR ICE MAKER
9

Publicidad

loading

Este manual también es adecuado para:

Nimd3314bs-is