Fein 7 271 03 Manual De Instrucciones página 12

OBJ_BUCH-0000000153-002.book Page 12 Wednesday, February 10, 2016 9:38 AM
en
12
Changing the tool.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acciden-
tal starting of the power tool.
Mounting the pilot bit (figure 3).
Insert the centering drill bit with a turning motion into the tool holder until it springs back.
Fig. 3
1.
Pilot bit
2.