Philips AVENT SCD503 Manual De Usuario página 6

5 Product overview
A Parent unit
1 Sound level lights
2 On/off button 3
3 Volume - button
4 'link' light
5 Socket for small plug of adapter
6 Battery light
7 Volume + button
8 Release button of battery
compartment lid
9 Battery compartment lid
10 Adapter
B Baby unit
1 Nightlight button
2 On/off button 3
3 Power-on light
4 Fixed power cord
5 Adapter
6 Preparing for use
6.1 Baby unit
The baby unit runs on electrical power and
has a fixed power cord.
Put the adapter of the power cord in an
1
electrical outlet.
6.2 Parent unit
The parent unit runs on electrical power.
You can also insert batteries to allow mobile
use of the parent unit.
6.2.1 Operation on electrical power
Put the small plug in the socket in the
1
side panel of the parent unit and put the
adapter in an electrical outlet.
6.2.2 Inserting the batteries
If the parent unit is not close to an electrical
outlet, you can run it on two 1.5 V R6 AA
alkaline non-rechargeable batteries or
two 1.2 V R6 AA rechargeable batteries
(not supplied). The operating time on full
batteries is up to 24 hours, depending on
the type of batteries used and on how long
and how often you use the parent unit on
batteries.
Note:
D
Please note that the parent unit does not
charge the batteries when it is connected
to an electrical outlet. You can use
rechargeable batteries in the parent unit,
but you need to charge them in a separate
charger.
6