Philips AVENT SCD503 Manual De Usuario página 9

Dry materials
Wood, plaster,
cardboard, glass
(without metal,
wires or lead)
Brick, plywood
Reinforced concrete < 30 cm
Metal grilles or bars < 1 cm
Metal or aluminum
sheets
8 Features
8.1 Smart Eco mode
This baby monitor has Smart Eco modes as a
standard feature. This mode is always active
and automatically reduces the DECT signal
from the baby unit to the parent unit to save
energy and reduce radio transmission.
8.2 Baby unit
8.2.1 Nightlight
The nightlight produces a soft glow that
comforts your baby.
Press the nightlight button on top of the
1
baby unit to turn the nightlight on or off.
Material Loss of
thickness range
< 30 cm 0-10%
(12 in)
< 30 cm 5-35%
(12 in)
30-100%
(12 in)
90-100%
(0.4 in)
< 1 cm 100%
(0.4 in)
8.3 Parent unit
8.3.1 Battery light
The battery light is off when the parent
1
unit is connected to an electrical outlet
or the batteries contain enough energy.
When the batteries are low, the battery
2
light flashes red and the parent unit
beeps.
Replace the batteries when they are low
3
(see 'Inserting the batteries' in chapter
'Preparing for use').
8.3.2 Setting the volume
Press the + button to increase the
1
volume.
•
You hear a beep each time you
press the button to increase or
decrease the volume by one level.
•
The sound level lights light up
briefly to show the current volume.
9