Descargar Imprimir esta página

Domo DO1052DV Manual De Instrucciones página 36

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 41
4.
Remove the bottom screw, hinge bracket and adjustable foot from the bottom of the appliance.
om hinge. Then remove the adjustable feet from both
Reverse Door
5.
Take the hinge pin out of the hinge bracket. Turn the bracket around and tighten the pin again.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
se Door
oor
w and remove the bottom hinge pin, turn the bracket over and replace it.
se Door
move the bottom hinge pin, turn the bracket over and replace it.
w and remove the bottom hinge pin, turn the bracket over and replace it.
Unscrew
Unscrew
6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable
6.
Attach the screws, hinge bracket and adjustable foot to the opposite side of the bottom. Loosely
Unscrew
feet.
secure.
bracket fitting the bottom hinge pin. Replace both adjustable
bracket fitting the bottom hinge pin. Replace both adjustable
fitting the bottom hinge pin. Replace both adjustable
7. Place the door back on. Ensure the door is aligned horizontally and
vertically, so that the seals are closed on all sides before finally
tightening the top hinge.
7.
Carefully set the door back into place. Ensure the door is aligned horizontally and vertically so that
e door back on. Ensure the door is aligned horizontally and
the seals are closed on all sides before finally tightening the top hinge. Insert the hinge back and
y, so that the seals are closed on all sides before finally
ng the top hinge.
screw it to the top of the appliance.
e door back on. Ensure the door is aligned horizontally and
y, so that the seals are closed on all sides before finally
ack on. Ensure the door is aligned horizontally and
ng the top hinge.
t the seals are closed on all sides before finally
8. Put the top cover and fix it with 2 screws on the back.
p hinge.
op cover and fix it with 2 screws on the back.
8.
Put the top cover back and fix it in place with the screws.
op cover and fix it with 2 screws on the back.
9. Fix the thermostat knob.
r and fix it with 2 screws on the back.
hermostat knob.
hermostat knob.
36
DO1052DV
at knob.
7
Unscrew
8
8
Screw
Screw
Screw
screw
screw
screw
8
Screw
screw

Publicidad

loading