Domo DO1052DV Manual De Instrucciones página 72

4. Odskrutkujte spodný skrutky pántu, zložte záves pántu aj nastaviteľnú prednú nôžku.
hinge. Then remove the adjustable feet from both
Reverse Door
oor
5. Povoľte závesný kolík pántu, vyberte otočte a kolík opäť dotiahnite.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
oor
move the bottom hinge pin, turn the bracket over and replace it.
oor
move the bottom hinge pin, turn the bracket over and replace it.
move the bottom hinge pin, turn the bracket over and replace it.
Unscrew
Unscrew
Unscrew
6. Upevnite spodný pánt aj nožičku na druhú stranu (tam kam chcete umiestniť dvere). Použite skrutky,
6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable
ktoré ste.
feet.
fitting the bottom hinge pin. Replace both adjustable
fitting the bottom hinge pin. Replace both adjustable
fitting the bottom hinge pin. Replace both adjustable
7. Na spodnej pánt nasaďte späť dvere. Dvere musia byť vodorovne, aby ich tesnenie priliehalo po
7. Place the door back on. Ensure the door is aligned horizontally and
vertically, so that the seals are closed on all sides before finally
ack on. Ensure the door is aligned horizontally and
celom obvode. Ak dvere dobre tesní, môžete usadiť aj horný pánt a priskrutkovať ho.
tightening the top hinge.
t the seals are closed on all sides before finally
p hinge.
ack on. Ensure the door is aligned horizontally and
t the seals are closed on all sides before finally
ack on. Ensure the door is aligned horizontally and
p hinge.
t the seals are closed on all sides before finally
p hinge.
8. Put the top cover and fix it with 2 screws on the back.
r and fix it with 2 screws on the back.
8. Na záver položte späť horný kryt prístroja a priskrutkujte ho.
r and fix it with 2 screws on the back.
r and fix it with 2 screws on the back.
9. Fix the thermostat knob.
at knob.
72
at knob.
DO1052DV
at knob.
7
Unscrew
Screw
Screw
Screw
screw
screw
screw
8
Screw
screw