Publicidad
Idiomas disponibles
Idiomas disponibles
12
one way. If the plug does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician. Do not attempt to
defeat this safety feature.
9: Before First Use
Place the box on a large, sturdy flat surface. Carefully unpack your
machine and remove all packaging material and literature. Remove
the hanging tag from the frother before use. After unpacking the
machine, check to make sure the appliance is complete and
undamaged. If in doubt, please call our customer service department
at 1-800-322-3848 (U.S. Only), and wait for the Magnifica prompt. To
remove any dust that may have accumulated during packaging, you
may wipe the unit with a clean, damp cloth. Dry thoroughly. Do not
immerse the machine in water or other liquid. Clean the water tank
with warm water and mild detergent. Rinse and dry thoroughly. Do
not use harsh or abrasive cleaners. (See "Cleaning and Maintenance"
section of this manual for detailed instructions.) Keep all plastic bags
away from children. Note: Test the water hardness before first use.
Refer to the "Checking the Water Hardness" section of this manual for
more details.
10: Checking the Water Hardness
The machine was released from the factory with a specific pre-set
setting for water hardness. To change that setting, please follow the
instructions below step by step.
1. After removing the "Water Hardness" test strip from its packaging
immerse it completely in the water for a few seconds, then remove it.
2. Wait about 30 seconds for the test strip to change color. A number
of red squares will appear.
3. Check that the machine is off (Note: All of the indicator lights are
off).
4. Press the
button and hold it for 5 seconds. The four
lights will illuminate.
5. Press the
button repeatedly until the number of lights coincides
with the number of red squares on the test strip. (Ex. If 3 red squares
appear on the test strip, press the
indicator lights illuminate.
6. Press the
button to save the data. The machine is now
programmed to indicate a decalcification warning when necessary,
based on the hardness of the water.
button until the 3
Publicidad
