Novoferm NovoDock L100 Instrucciones De Montaje página 5

Caution!
Always observe the valid
EN
safety regulations!
Instruction!
Only attach lifting equipment to the points indicated by this symbol!
Always use both lifting eyes!!
Caution, deadly danger!
Only use lifting equipment that is in good operating order. The lifting equipment must be used in the prescribed way and
have a capacity of at least 10 kN. Observe the accident prevention regulations in force at the company!
Never stand or work under a suspended load!
Caution!
Keep away from the pit edge in order to avoid foot injuries!
Instruction!
If any malfunctions are observed, secure the leveller immediately and inform the Novoferm customer service organisation
that is responsible for your company.
Painting welded and damaged surfaces:
Surfaces that are to be painted must be dry and free of dirt, grease, rust, etc.
Use a wire brush and thinner.
• Spray cold galvanising paint on the surfaces and allow to dry for approximately 30 minutes
• After installation, apply a final coat of paint to all areas of paint damage using the touch-up paint provided.
3
This installation manual must be given to the customer and kept safely during the entire period of use!