Publicidad
N
x 2
O
x 2
FIG. 4
4. Rotate left side assembly and set it in place on the Right Side Assembly (D). Repeat Step 3
and attach the Right Side Assembly (D) to the two Sleepers (B) using Screws (N) and the
Base (C) to the cleat using Screws (O).
O
x 8
Flush
FIG. 5
5. Position the body assembly onto the Top (E) with equal distance side to side. Also, make sure
the back edges of the side assemblies are flush to the back edge of the top. See FIGURE 5.
Attach body assembly to the Top (E) using Screws (O) through the cleats in the side panels
and the front Sleeper (B).
N
O
O O
O
O
N
O
O
O
541W – Page 5
Publicidad
