Descargar Imprimir esta página

Jacto PJB-16U Manual Del Operador página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

down;
2.
Remove screw A;
3.
Remove base cover B;
4.
Unscrew filter cover C;
5.
Clean or replace filtering element D.
WARNING!
Use of individual protective clothing and
safety equipment is required.
A
B
• Only fill the tank with a water soluble agrochemical or an already mixed pow-
der liquid form through the filling filter. Do not prepare mixtures directly in
the sprayer tank;
• This sprayer is an electronic tool and must be protected from severe environ-
mental conditions. When not using, do not leave the sprayer in sun, rain or
frost;
• Do not submerge the sprayer completely or partially;
• After finishing the application, clean and wash all equipment in an approved
decontamination area;
• Clean the sprayer before storage. Circulate fresh water through the tank,
pump and hoses after each use. This will help remove chemical residues and
extend life of sprayer parts;
• The spray lance can be conveniently stored on the clips on the side of the tank;
• Nozzles and filters must be periodically cleaned or replaced. Do not clean
nozzles or filters with sharp hard objects, nor blow through them using the
mouth;
• Before storage the sprayer during periods of harsh winter, in temperatures less
than 0º C, circulate fresh water through the tank, pump and hoses. Release the
trigger valve to drain all the liquid inside the sprayer. Use antifreeze if neces-
sary. Make sure there is no liquid inside the tank before you storage the sprayer
in a safe place.
WARNING!
Discard the liquid used to clean the sprayer in a proper and
approved local for this purpose. Do not contaminate the
environment.
C
D
11/51

Publicidad

loading