Publicidad
Idiomas disponibles
Idiomas disponibles
5.7 Fry Assist
This function lets you set a heat setting level
to fry your food. The hob keeps the selected
temperature automatically while frying. Once
the heat setting level is set, no manual
temperature adjustment is necessary.
You can set the function for the
left front cooking zone of the
hob.
CAUTION!
Use laminated pans only with
low heat setting level to prevent
overheating and damage of the
cookware.
To activate the function:
1. Put an empty pan on the left front
cooking zone. Do not use a lid while
using the function.
2. Press
. The indicator above the
symbol comes on. The heat setting is set
to
.
3. Set the best heat setting for the food you
want to fry. Refer to the table in Hints and
tips chapter. The indicators above the
symbol start to flash slowly. The zone is
heating up.
4. Wait until the pan reaches the
temperature you set. A signal sounds. All
indicators above the symbol are on.
5. Put the food and some fat on the pan.
To deactivate the function:
Touch 0 of the left front cooking zone or
touch
.
5.8 Timer
• Count Down Timer
You can use this function to set the length of
a single cooking session.
First set the heat setting for the cooking
zone, then set the function.
To set the cooking zone: touch
repeatedly until the indicator of a cooking
zone appears.
To activate the function: touch
timer to set the time (00 - 99 minutes). When
the indicator of the cooking zone starts to
flash, the time counts down.
12
ENGLISH
To see the remaining time: touch
the cooking zone. The indicator of the
cooking zone starts to flash. The display
shows the remaining time.
To change the time: touch
cooking zone. Touch
To deactivate the function: touch
the cooking zone and then touch
remaining time counts down to 00. The
indicator of the cooking zone disappears.
To stop the sound: touch
• CountUp Timer
You can use this function to monitor how
long the cooking zone operates.
To set the cooking zone: touch
repeatedly until the indicator of a cooking
zone appears.
To activate the function: touch
timer.
cooking zone starts to flash, the time counts
up. The display switches between
counted time (in minutes).
To see how long the cooking zone
operates: touch
The indicator of the cooking zone starts to
flash. The display shows how long the zone
operates.
To deactivate the function: touch
then touch
cooking zone disappears.
• Minute Minder
You can use this function when the hob is
activated and the cooking zones do not
operate. The heat setting display shows
To activate the function: touch
touch
of the
When the time finishes, an acoustic signal
sounds and 00 flashes.
To stop the sound: touch
or
When the countdown ends, an
acoustic signal sounds and 00
flashes. The cooking zone
deactivates.
appears. When the indicator of the
to set the cooking zone.
or
. The indicator of the
or
of the timer to set the time.
to set
to set the
.
to set
. The
.
of the
and the
and
.
and then
.
Publicidad
