Energy Saving Tips; Switching On The Refrigerator - Dometic COOLMATIC CRX 50 Instrucciones De Montaje Y De Uso

Using the refrigerator
A
NOTICE! MATERIAL DAMAGE
• Do not place any electrical devices inside the cooler. The
only exceptions are devices approved for the purpose by the
manufacturer.
• Ensure that food or liquids in glass containers are not excessively
refrigerated. Liquids expand when they freeze and can therefore
destroy glass containers.
• Food may only be stored in its original packaging or in suitable
containers.
• Make sure that you only put items in the cooler which may be kept at
the selected temperature.
I
NOTE
• Before starting your new refrigerator for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter "Cleaning and maintenance" on
page 23).
• Do not use force to press the flap of the freezer.
• Do not pull out the dividing wall if there is ice in the freezer.
• Do not remove the control panel membrane when operating the
refrigerator.
8.1

Energy saving tips

• Choose a well ventilated location which is protected from direct sunlight.
• Allow hot food to cool down first before you put it in the refrigerator.
• Do not open the refrigerator more often than necessary. If the door is left open for
more than 5 minutes, the light starts to flash.
• Do not leave the door open for longer than necessary.
• Defrost your refrigerator as soon as a layer of ice forms.
• Avoid unnecessarily low temperature settings.
• Clean dust and dirt from the condenser at regular intervals.
8.2

Switching on the refrigerator

➤ Switch the refrigerator on by pressing the
I
NOTE
8
After switching on, the refrigerator needs some time before the
compressor starts up.
20
CRX50, CRX65
button.
EN