Amprobe PM53A Manual De Uso página 9

Voltage
With Auto on the LCD, press the SELECT button 3 times to select V ac function. The meter displays
LoZBV when it is ready.This function is auto-ranging.
With Auto on the LCD, press the SELECT button 4 times to select V dc. The meter displays LoZ V
when it is ready. This function is auto-ranging.
Resistance
With Auto on the LCD, press the SELECT button 5 times to select resistance function, The meter
displays MΩ when it is ready. This function is auto-ranging.
Frequency
With Auto on the LCD, press the SELECT button 6 times to select frequency function, The meter
displays Hz when it is ready. This function is auto-ranging.
Capacitance
With Auto on the LCD, press the SELECT button 7 times to select capacitance function, The meter
displays nF when it is ready. This function is auto-ranging.
Return to Auto
Press the SELECT button 8 times to return to AutoTect test mode.
Product Maintenance
Maintenance
Do not attempt to repair this meter. It contains no user serviceable parts. Repair or servicing should
only be performed by qualified personnel.
Cleaning
Periodically wipe the case with a damp cloth and mild detergent; do not use abrasives or solvents. If
the meter is not to be used for periods of longer than 60 days, remove the battery and store it
separately
7