Publicidad
Idiomas disponibles
Idiomas disponibles
60
2.
Check the oil level in the engine crankcase.
3.
See fuel supply. Fill the fuel tank at a prudent distance from the top of the tank to provide space for tank
expansion.
4.
Make sure that the spark plug cable and spark plug are tight.
5.
Check the position of the wheels and the locking of the wheels.
6.
Check the position of the spur of the rotary tiller.
7.
Check under and around the engine for signs of fuel leaks.
8.
Inspect fuel hoses.
9.
Look for signs of engine damage.
1
10.
Remove dirt from the muffler and starter area.
USE
COLD START
1.
Move the throttle lever up to the "START RUN" position.
2.
Press the choke 3 times.
3.
Pull the starter handle slowly once and allow it to retract normally. Then pull quickly.
4.
Release the starter handle gently.
5.
When the engine starts and warms up, move the lever to the
working position (halfway) and the throttle speed will increase.
START WITH WARM ENGINE
Follow the same steps as cold start but start the machine with the accelerator
lever in the working position (half-way).
CLUTCH
The clutch switches the engine power to the transmission on and off. The
clutch lever has a safety lock that must be released before the clutch lever
can be pressed.
Press the clutch lever, and the rotating blades will rotate, release the clutch and stop.
STOP
In case of emergency:
1.
Move the throttle lever to the "STOP" position.
2
3
Publicidad
