Stanley SW19 Instrucciones Originales página 24

24 • ENGLISH
End-of-season storage
reat the appliance with non-corrosive, non-toxic antifreeze
before storing it away for winter. Put the appliance in a dry
place, protected from frost.
STORAGE AND TRANSPORTATION (Fig. E)
Store the accessories as shown in Fig. E.
Transport the machine as shown in Fig. E.
HOW TO AVOID DAMAGING SURFACES
Warning!
f Using the appliance to wash tyres may damage the
tyre and can be dangerous.
f Never point the high pressure jet straight at the tyre.
f Always use the appliance at the lowest pressure setting
when cleaning in the vicinity of wheels and tyres.
f Never use the "Turbo Lance" for washing any part of
the vehicle.
f For further information refer to section: "Recommended
cleaning procedure".
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste. Should you
find one day that your STANLEY product needs
replacement, or if it is of no further use to you, do not
SPECIFICATIONS
Power
Working flow
Max water flow
Pressure
Maximum pressure
MAX PSI
T° input
Maximum input pressure
Repulsive force of the gun to
the maximum pressure
Motor insulation
Motor protection
Sound level K=2,5 dB(A):
L (EN 60704-1)
PA
L (EN 60704-1)
WA
Unit vibrations (K = 1 m/s
Weight
SW19
AR, CH 220V~ 50Hz
1900W
5,3 l/min
6,6 l/min
10 MPa (100 bar)
13 MPa (130 bar)
1885
50 ºC
1 MPa
12,5 N
Class F
IPX5
72 dB(A)
88 dB(A)
): ‹2,5 m/s
2
13kg (28,7lb)
dispose of it with household waste. Make this product available
for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent environmental
pollution and reduces the demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
¡Important! To ensure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized service
centers or other qualified organizations, always using identical
replacement parts. Unit contains no user service able parts inside.
SERVICE INFORMATION
STANLEY offers a full network of company-owned and authorized
service locations. All STANLEY Service Centers are staffed
with trained personnel to provide customers with efficient and
reliable power tool service. For more information about our
authorized service centers and if you need technical advice,
repair, or genuine factory replacement parts, contact the
STANLEY location nearest you.
B2C, B2 220V~ 60Hz
1900W
5,3 l/min
6,6 l/min
10 MPa (100 bar) 8,5 MPa (85 bar)
13 MPa (130 bar) 12 MPa (120 bar)
1885
50 ºC
1 MPa
12,5 N
Class F
IPX5
72 dB(A)
88 dB(A)
‹2,5 m/s
13kg (28,7lb)
B3 120V~ 60Hz BR 127V~ 60Hz
1600W
5,2 l/min
6,3 l/min
8,5 MPa (85 bar)
12 MPa (120 bar)
1740
50 ºC
1 MPa
11,3 N
Class F
IPX5
72 dB(A)
88 dB(A)
‹2,5 m/s
13kg (28,7lb)
1600W
5,2 l/min
6,3 l/min
1740
50 ºC
1 MPa
11,3 N
Class F
IPX5
72 dB(A)
88 dB(A)
‹2,5 m/s
13kg (28,7lb)