Simpson WBK4200 Manual De Instrucciones página 10

NOTE: Photographs and line drawings used in this manual are for reference
only and do not represent a specific model.
Compare the illustrations with your unit to familiarize yourself with the location of
various controls and adjustments. Save this manual for future reference.
1
B
D
BASIC ELEMENTS OF A pRESSURE WASHER (FIG. 1)
A. high Pressure Pump: Increases the pressure of the water supply.
B. Engine: Drives the high pressure pump. Refer to the engine manual for location
and operation of engine controls.
C. high Pressure hose: Carries the pressurized water from the pump to the gun
and spray wand.
D. Spray Gun: Connects with spray wand to control water flow rate, direction,
and pressure.
E. Quick-Connect Spray Wand: Allows the user to quickly change out high-
pressure nozzles. See how To Use Spray Wand instructions in Operation
section.
f. Detergent Siphon hose (not shown): Feeds cleaning agents into the pump to mix
with the water. See how To Apply Chemicals/Cleaning Solvents instructions
in Operation section.
GET TO KNOW THE pRESSURE WASHER
E
10- ENG
G
I
J
A
h
k
C