Publicidad
Idiomas disponibles
Idiomas disponibles
2.3 General installation Recommendations
The installation of the appliance must comply with all local regulations, including those that refer to national and
European standards.
Although the following describes an example installation to ensure good performance, it may not be ideal for
your circumstances. In any case, the installation should be done by an authorised installer.
CARBEL will be responsible for the provided appliance, but in no case for the installation of the same.
1. Fumes exhaust pipe
2. Entry of air from the outside used for combustion (optional lower or rear connection)
3. Hot air outlet coming from the stove's convection chamber. At least one of the four air vents of the convection
chamber must be enabled.
4. Hot air outlet of the chimney chamber by natural convection.
5. Optional outlet for hot air to other rooms, blown by fans.
6. air inlet from outside chimney's chamber to the fan box.
The building work must be finished in such a way that the wood burner can expand during operation: the
brickwork must never be supported on or against the sides of the appliance. Leave a minimum expansion joint of
0.5 cm on each side and at least 1 cm the top of the front.
1
6
2
5
4
3
6
15
Publicidad
