Cole-Parmer MP-100 Serie Manual De Instrucciones página 2

English
IEC connector
Heating
controller
Fig 1
MELTING POINT
APPARATUS
MP-100
Thank you for purchasing this Cole-Parmer
product. To get the best performance from the
equipment, and for your own safety, please read
these instructions carefully before use. (For an
illustration of the controls, see Fig 1).
2
Lens
Capillary tube
Safety advice before use
This equipment is designed to operate under the
following conditions: -
v For indoor use only
v Use in a well ventilated area
v Ambient temperature +5°C to +40°C
v Altitude to 2000m
v Relative humidity not exceeding 80%
v Mains supply fluctuation not >10%
v Overvoltage category II IEC60364-4-443
v Pollution degree 2 IEC664
v Use with a minimum distance all around of
Thermometer
200mm from walls or other items
If the equipment is not used in the
manner described in this manual the
protection provided by the equipment
may be impaired.
Thermometer
support