Publicidad
Idiomas disponibles
Idiomas disponibles
ENJOYING STEREO SOUND
You can enjoy 2-channel stereo playback as the beam modes by pressing STEREO on the remote control. Sounds are
output from the front right and left channels. This is ideal for playing back hi-fi sources, such as CDs, and can be used to
replace your TV speakers.
Notes
• When you play back Dolby Digital audio signals in the stereo playback, the dynamic range becomes compressed. If the volume level
decreases to the extreme, use other beam modes except My Beam.
• When the stereo playback is selected as the beam mode, the surround modes (see page 46) become ineffective.
CH LEVEL
1
Set the operation mode selector to YSP.
TV/AV
YSP
2
Press STEREO to select the stereo playback
as the beam mode.
"STEREO" appears in the front panel display.
STEREO
50
En
Enjoying stereo sound
1
2
3
STEREO
MY BEAM
MY SUR.
4
5
6
7
8
9
SUR. DECODE
+10
0
MENU
TV/AV
ENTER
YSP
TEST
RETURN
4
Note
When you play back multi-channel sources, all signals except
those from the front left and right channels are mixed down and
output from the front left and right channels. No audio is output
from the center and surround channels.
Publicidad
