Descargar Imprimir esta página

Progress Lighting AirPro P250061 Manual De Instalación página 14

Publicidad

Idiomas disponibles

Idiomas disponibles

Remote Control
Timer:
While the fan is on press 2h - turns on a 2 hour
run timer.
While the fan is on press 4h - turns on a 4 hour
run timer.
While the fan is on press 8h - turns on an 8 hour
run timer.
Forward/Reverse:
Changes direction of ceiling fan.
Breeze:
Press and release this button to enable the
Breeze function, this will change your fan
speed randomly, simulating a relaxing breeze.
Fan speed:
LEDs on the fan speed button will illuminate
to the corresponding speed.
Press and release 1: turns the fan speed to 1.
Press and release 2: turns the fan speed to 2.
Press and release 3: turns the fan speed to 3.
Press and release 4: turns the fan speed to 4.
Press and release 5: turns the fan speed to 5.
Press and release 6: turns the fan speed to 6.
Fan OFF:
Turns fan Off
Lights ON/OFF
Press and release the lights on button to turn
both lights on to the last setting.
Press and release the lights off button to turn
both lights off.
11. Operating Your Fan
Uplight/Downlight Control:
Up Light: Press and release the button to turn
the up light on/off. Press and hold the button to
activate dimming function and release once the
desired brightness level is reached.
Down Light: Press and release the button to
turn the down light on/off. Press and hold
the button to activate dimming function and
release once the desired brightness level is
reached.
2h
4h
8h
Forward/
Reverse
3 4
2
5
Fan speed
OFF
1 6
Lights on
Uplight
R
Warm weather - (Forward) A downward air
flow creates a cooling effect as shown in Figure
24. This allows you to set your air conditioner
on a higher setting without affecting your
comfort.
Cool weather - (Reverse) An upward air flow
moves warm air off the ceiling are as shown in
Figure 25. This allows you to set your heating
unit on a lower setting without affecting your
comfort.
Timer
Breeze
Fan off
Lights off
Downlight
Figure 23
Figure 24
Figure 25

Publicidad

loading