Progress Lighting AirPro P250061 Manual De Instalación página 9

Installing the
Receiver into the
Mounting Bracket
1. Position the house supply wires to one side
of the slide-on mounting bracket; position
the fan wires to the opposite side.
2. Insert the narrow end of the receiver (as
shown, flat side toward ceiling) into the
slide-on mounting bracket until it rests on
top of the ball/downrod assembly. (Figure
11)
Wiring the Receiver to
the Household Wiring
1. Connect the green wire to the household
ground wires using a wire connecting nut.
2. Connect the receiver black wire to
the household black wire using a wire
connecting nut.
3. Connect the receiver white wire to
the household white wire using a wire
connecting nut.
Wiring the Fan to the
Receiver
1. If using the 6 in. ball downrod assembly
provided, wire the receiver to the fan wires
by connecting the molded adaptor plugs
from the receiver with the molded adaptor
plugs of the fan motor assembly together.
(Figure 12)
2. If you wish to use longer downrod, you
can use the extension lead wire (68 in.)
provided by connecting the molded
adaptors together.
Figure 11
6. Making the Electrical Connections
SUPPLY CIRCUIT
L N
BLACK WHITE
GREEN
Remote
Receiver
BLUE
GREY
YELLOW
BROWN
WHITE
ORANGE
BLUE
GREY
YELLOW
BROWN
WHITE
ORANGE
WHITE
BLUE
WHITE
BLACK
Figure 12