Menu operations
1
If no operation is done
for about 60 seconds, the
operation will be canceled.
Menu item
DEMO
CLOCK
DIMMER SET
BRIGHTNESS
SCROLL *
TAG DISPLAY ON : Shows the Tag information while playing MP3/WMA tracks. / OFF : Cancels.
PRO EQ
FADER *
BALANCE *
LOUD
VOL ADJUST
1
*
The illumination control lead connection is required. (See "Installation/Connection Manual.") This setting may not work
correctly on some vehicles (particularly on those having a control dial for dimming). In this case, change the setting to
any other than <DIMMER AUTO>.
2
*
Some characters or symbols will not be shown correctly (or will be blanked) on the display. When receiving an HD Radio
station, the information always scroll automatically on the display regardless of the setting.
3
*
If you are using a two-speaker system, set the fader level to "00."
4
*
This adjustment will not affect the subwoofer output.
12
ENGLISH
2
[Hold]
ON : Display demonstration will be activated automatically if no operation is done for
about 20 seconds. / OFF : Cancels. (page 4)
For settings, see page 4.
AUTO : Changes the display and button illumination between the Day/Night adjustments
in <BRIGHTNESS> setting when you turn off/on the car headlights *
Night adjustments in <BRIGHTNESS> setting for the display and button illumination. /
OFF : Selects the Day adjustments in <BRIGHTNESS> setting for the display and button
illumination.
DAY [ 31 ] / NIGHT [ 15 ] : Selects the display and button illumination brightness level
[00 — 31] for day and night.
2
ONCE : Scrolls the displayed information once. / AUTO : Repeats scrolling (at 5-second
intervals). / OFF : Cancels.
(Pressing DISP for more than one second can scroll the display regardless of the setting.)
See page 11.
3,
4
*
R06 — F06 [ 00 ] : Adjusts the front and rear speaker output balance.
4
L06 — R06 [ 00 ] : Adjusts the left and right speaker output balance.
ON : Boost low and high frequencies to produce a well-balanced sound at a low volume
level. / OFF : Cancels.
–05 — +05 [ 00 ] : Presets the volume adjustment level of each source (except "FM"),
compared to the FM volume level. The volume level will automatically increase or decrease
when you change the source. Before adjustment, select the source you want to adjust.
("VOL ADJ FIX" appears on the display if "FM" is selected as the source.)
Selectable setting, [Initial: Underlined]
3
Repeat step 2 if necessary.
• To return to the previous
menu, press
.
• To exit from the menu, press
MENU.
1
. / ON : Selects the