Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT FEATURES
Due to technological innovations, the product descriptions in this manual may not
be completely consistent with your refrigerator. Detailed information is in
accordance with the final product.
PREPARATIONS FOR USE
INSTALLATION LOCATION:
1. VENTILATION CONDITION
The position you select for the refrigerator installation should be well-ventilated
and has less hot air. Do not locate the refrigerator near a heat source such as
cooker, boiler, and avoid it from direct sunlight, thus guaranteeing the
refrigeration effect while saving energy consumption. Do not locate the
refrigerator in the damp place, so as to prevent the refrigerator from rusting and
leaking
amount of the refrigerator
of the room in which the refrigerator is installed shall be less than 8g / m³.
NOTE: The amount of refrigerant charged for the refrigerator can be found on the
nameplate.
2. HEAT DISSIPATION SPACE
When working, the refrigerator gives off heat to surroundings. Therefore, at least
30mm of free space should be spared at the top side, more than 100mm on both
sides, and above 50mm at the back side of the refrigerator.
Dimensions in mm:
W
D
549
557
electricity.
being divided by
H
A
845
915
No
1
Freezer door
2
Thermostat and Lamp
3
Refrigerator glass shelf
4
Crisper cover
5
Crisper
6
Adjustable feet
7
Door shelves
The result of the refrigerant charge
B
C(°)
1058
125±5
47
Description
the total
space
E
F
50
100
Publicidad
