Carefully wipe dry the door gasket, clean the groove using a wooden chopstick
wrapped with cotton string. After the cleaning, fix the four corners of the door
gasket first, and then embed it segment by segment into the door groove.
Interruption of power supply or failure of the refrigerating system
•
Take care of the frozen foods in the event of an extended non-running of
the refrigerating appliance (such as interruption of power supply or failure
of the refrigerating system).
•
Try to open the refrigerator door as less as possible, in this way can food
safely and freshly kept for hours even in hot summer.
•
If you get the power outage notice in advance:
1) Adjust the thermostat knob to the high mode an hour in advance, so that
foods get fully frozen (Do not store new food during this time!). Restore the
temperature mode to the original setting when power supply becomes normal
in a timely manner.
2) You can also make ice with a watertight container, and put it in the upper part
of the freezer, so as to extend the time for fresh food to be stored.
NOTE: Once the refrigerator is used, you'd better use it continuously; and
under normal circumstance, do not stop its use, so as not to affect the service
life.
CHANGING THE LAMP
The LED lamp is used by the refrigerator for lighting, which features low
energy consumption and long service life. In case of any abnormality,
please contact the after-sales personnel for visiting service. The LED lamps
can only be replaced by the after-sales personnel.
Lamp type: LED light.
Energy efficiency level: G
SAFETY-CHECK AFTER MAINTENANCE
•
Is the power cord broken or damaged?
•
Is the power plug firmly inserted into the socket?
•
Is the power plug abnormally overheated?
NOTE: Electric shock and fire accident may be caused in case the power
cord and plug is damaged or stained by dust. If any abnormality, please unplug
the power plug and get in contact with the vendor.
HOW TO DISASSEMBLE THE PARTS
SHELF:
Hold one end of the shelf, and lift it up while pulling it outward.
53