Publicidad
Idiomas disponibles
Idiomas disponibles
> Before Start
> Part Names
> Install
> Initial Setup
> Playback
Supplementary information | Advanced Setup | Others
Step3: Connect Other Cables
1. Network Hookup
Connect this unit to the network using wired LAN or Wi-Fi
(wireless LAN). You can enjoy Network Functions such as
AM
internet radio by connecting to the network. If you connect
by wired LAN, connect to the router with an Ethernet cable
to the LAN port as shown in the illustration. To connect by
Wi-Fi, select "Wi-Fi" in Initial Setup (P12) and configure the
connection.
2. AM, FM Antenna Hookup
a
Move the antenna around while playing the radio to find the
position with the best reception. Use a thumb tack or similar
to attach the FM Indoor antenna to a wall.
d
FM indoor antenna
FM
3. Power Cord Hookup
The power cord must be connected only after all other
connections are completed.
c
b
2
a AM Indoor Antenna, b FM Indoor Antenna, c Ethernet Cable, d Power Cord
En
11
Publicidad
