Bosch MFQ365 Serie Instrucciones De Uso página 15

2. Insert the required pair of tools in the
apertures and press on the tools until
they engage.
a. Note the shape of the plastic parts
on the tools to avoid mixing them
up.
b. Insert tools one after the other to
stop them from getting caught!
3. Insert the mains plug.
4. Insert the tools in the receptacle and
switch the appliance on at the required
level.
– Level 1, 2: for working in and mixing in.
– Level 3, 4, 5: for kneading and beating.
– Instantaneous switching M: for mixing
or beating ingredients quickly.
5. Move the mixer to and fro in the bowl
while mixing. Never reach into the
rotating tools.
6. As soon as the desired consistency is
achieved, set the switch to 0 and wait
for the appliance to come to a standstill.
7. Pull out the mains plug.
8. Release and remove the tools by press-
ing the ejector button. The ejector button
cannot be actuated unless the switch is
in the 0 position.
Base unit with high-speed hand
blender
The high-speed hand blender is suitable for
blending mayonnaise (only whole eggs),
sauces, mixed drinks, baby food, cooked
fruit and vegetables. For puréeing soups.
Use the universal cutter for cutting/chopping
raw food (onions, garlic, herbs).
X Fig. C
1. Move slider to position "x". The rear
aperture is open, the apertures for
inserting the tools are closed.
2. Insert the high-speed hand blender and
lock into position.
3. Place the high-speed hand blender in
the receptacle. To prevent food from
splashing, immerse the high-speed
hand blender in the food before switch-
ing on the appliance.
Warning!
Do not immerse the appliance in liquid
above the joint between the high-speed
hand blender and base unit.
4. Insert the mains plug. Turn the switch to
setting M and hold.
5. Process the ingredients as required.
Tip: The high-speed hand blender works
better if there is some liquid between the
ingredients being processed.
6. Release the switch.
Tip: To make cleaning the high-speed hand
blender easier, after use place it in a recep-
tacle containing clean water and briefly turn
the switch to setting M several times.
7. Pull out the mains plug.
8. Remove the high-speed hand blender
by simultaneously pressing both release
buttons. When doing so, hold the lock of
the rear aperture in place to prevent the
high-speed hand blender from jamming.
Cleaning
The appliance and the accessories used
must be thoroughly cleaned after each use.
X Table E
W Risk of electric shock!
Disconnect the mains plug before
cleaning.
Warning!
■ Do not use cleaning agents containing
alcohol or spirits.
■ Do not use sharp, pointed or metal
objects.
■ Do not use abrasive cloths or cleaning
agents.
■ Clean the base unit with a soft, damp
cloth and then rub dry.
■ Clean the high-speed hand blender
in the dishwasher or with a brush under
running water. Never clean blades with
bare hands. Leave the high-speed hand
blender to dry in an upright position
(blender foot blade at top) so that any
water inside can run out. X Fig. F
X Fig. G
■ The power cord can be wound up for
storage of the appliance.
Cleaning en
15