Sharp LL-T15G3 Manual De Funcionamiento página 24

Instructions for attaching a VESA compliant arm
The stand may be removed.
1.Turn off the monitor, and remove the analog
signal cable and the power cord from the
monitor.
2. Being careful not to damage the monitor, spread
out a soft cloth and lay the monitor on it display-
side down.
3. Remove the four screws and then remove the
stand from the monitor.
- The stand is specially made for use with this
monitor. Once having removed the stand, never
attempt to attach it to another device.
- Once having removed the screws, store them
together with the stand and if the stand is ever
re-attached be sure to use the original screws.
Using different screws could lead to a
malfunction.
4.Follow instruction no.6 on page 23 to attach the
arm to the monitor, then connect the analog
signal cable and the power cord.
24