Skil SR660301 Manual Del Propietário página 12

Attaching Abrasive Discs
Place the sander upside down on a flat
surface. Remove any dust or debris from the
backing pad. Align the holes of the abrasive
disc with the holes in the backing pad and
firmly press the abrasive disc against the
backing pad to ensure a good attachment
(Fig. 4).
Turning the Sander On/Off
To turn on the sander, depress the side of
the On/Off switch marked "I". To turn it off,
depress the side of the On/Off switch marked
"O" (Fig. 5).
Variable-speed Dial
The variable-speed feature on this sander
allows you to match the proper speed to the
material being sanded.
The variable-speed dial is used to adjust the
speed of the tool. Turn the dial to increase
or decrease the speed of the tool. Position
"1" selects the slowest speed; position "6"
selects the fastest speed. Adjust the speed for
optimum performance (Fig. 6).
12
Fig. 4
Fig. 5
Fig. 6
1 6