Descargar Imprimir esta página

Hart HGCS02 20V Manual Del Operador página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Kickback
Bar Nose Contact
Oil Can
Wear Gloves
Wear Safety Footwear
Keep Tool Away from
Electrical Lines/Keep
Bystanders Away
Recycle Symbol
Volts
V
Direct Current
NAME
DANGER! BEWARE OF KICKBACK.
Avoid bar nose contact. Tip contact may cause the
guide bar to move suddenly upward and backward,
which may cause serious injury.
Add bar oil to reservoir.
Wear non-slip, heavy-duty protective gloves when
handling the chain saw.
Wear non-slip safety footwear when using this
equipment.
DANGER! Risk of electrocution! Keep tool 50 feet
away from electrical lines. Keep all bystanders at least
50 ft. away or twice the height of the largest trees in
the felling area when felling.
This product uses lithium-ion (Li-ion) batteries. Local,
state or federal laws may prohibit disposal of batteries
in ordinary trash. Consult your local waste authority
for information r egarding available recycling and/or
disposal options.
Voltage
Type or a characteristic of current
10 – English
DESIGNATION/EXPLANATION

Publicidad

loading