Magic Chef MCSMC10S7F Guia Del Usuario página 12

BEFORE EACH USE
1� Make sure the float valve (Figure 4), anti-block shield (Figure 5), and gasket are free of obstruction and
mounted correctly into place�
Structure Diagram
of Float Valve
2� Before inserting the inner pot to the outer pot, remove debris and water from both�
3� Wipe the outer casing with a soft cloth if it is wet�
4� Install the condensation collector� On the back of the multicooker under the exhaust valve platform, firmly
press the condensation collector in place at the top of the base� This is used to collect excess condensation
from the lid�
Condensation
Collector
Figure 4
Disassembly and Assembly of Anti-Block Shield
Disassembly:
Screw upward
counterclockwise�
Anti-Block Shield
12
Figure 5
Assembly:
Screw downward
clockwise�
Figure 6