Before Use - Magic Chef MCSMC6B Guia Del Usuario

BEFORE USE

REMOVE PACKING MATERIALS
Take the multicooker out of the box and place it on a flat surface. To open the lid, hold the handle and turn the lid counter-clockwise, then
lift it off. Remove all packaging materials from inside of the appliance: plastic bags, accessories, and the plug. Be sure to remove any
stickers on the unit before using.
Clean the accessories with warm soapy water, and rinse the inner pot, the condensation collector and the gasket. Connect the power cord
to the unit and plug it in to a properly grounded outlet.
ATTACHING HANDLE TO GLASS LID
To attach the handle to the Glass Lid, remove the lid and the bag containing the hardware (handle, screws (x2), washers (x2), nuts (x2),
and rubber grommets (x2). Turn the lid upside down and insert the rubber grommets into the holes in the lid from the bottom. Put the
washers on the screws and insert the screws into the holes in the grommets from the bottom, so they are sticking up through the lid. Align
the holes in the handle over the screws, and use the nuts to secure the handle in place.
Nut
Grommet
Washer
Screw
Handle
Glass Lid
7
Figure 3