Phasak PH 8010 Manual De Instrucciones página 45

3.6. Operating Mode Description
Operating mode
Online mode
ECO mode
Frequency Converter
mode
Battery mode
Bypass mode
Standby mode
Segurança e harmonia
ININTERRUPTA
Description
When the input voltage is within acceptable range, UPS will
provide pure and stable AC power to output. The UPS will
also charge the battery at online mode.
Energy saving mode:
When the input voltage is within voltage regulation range,
UPS will bypass voltage to output for energy saving.
When input frequency is within 40 Hz to 70 Hz, the UPS can
be set at a constant output frequency, 50 Hz or 60 Hz. The
UPS will still charge battery under this mode.
When the input voltage is beyond the acceptable range or
power failure and alarm is sounding every 4 second, UPS
will backup power from battery.
When input voltage is within acceptable range but UPS is
overload, UPS will enter bypass mode or bypass mode can
be set by front panel. Alarm is sounding every 10 second.
UPS is powered off and no output supply power, but still can
charge batteries.
3. Operations
LCD display
PH 8010 | PH 8020 | PH 8030
Uninterruptible Power Supply
EN
43