11
1
12
1
13
2 mm
16
1
English
Seal the wall around the anchor
with waterproof sealant.
Failure to seal the wall can lead
to possible water damage.
Install the flange.
Install the arm on the riser.
Install the riser on the valve.
Confirm that the riser is level.
Tighten the shower arm set screw.
If the tile does not go all the way up the wall, the
shower arm can accommodate a difference of up to
⅜"
Tighten the connection nut.
Install the showerhead, handshower holder and
handshower (see page 0).