Periodic checks
CHECK
Cleaning the dirty water tank
Cleaning the front squeegee suction hose
Cleaning the rear squeegee suction hose
Cleaning the diverter valve
Cleaning the squeegee blades
Checking squeegee blade wear
Checking brush wear
PROBLEMS
Machine not working.
Brush not rotating.
Brush motor not starting easily.
Machine not scrubbing uniformly.
Detergent solution not reaching brush.
Suction motor not working.
TROUBLESHOOTING
CAUSES
Flat battery.
Main switch is not on.
Brush control button not depressed.
Brush control lever not activated.
You are working with a dry brush on a
The brush or disk is worn.
The detergent tank is empty
The hose delivering the detergent to
the brush is clogged.
Suction control button not depressed.
EN
X
X
X
X
X
X
X
X
X
SOLUTIONS
Recharge the battery.
Press main switch.
Press the brush button.
Activate brush control lever.
Increase the quantity of detergent.
Replace the brush.
Fill detergent tank.
Remove blockage.
Press the suction button.
X
24