Kenmore BC3002 Manual De Uso Y Cuidado página 22

WARNING
Electrical Shock Or Personal Injury
Hazard
Always turn off and unplug vacuum
cleaner before performing maintenance
to the vacuum cleaner. Failure to do so
could result in electrical shock or personal
injury from vacuum cleaner suddenly
starting.
TO CHECK THE BRUSHES
New Brushes
When brushes are worn to the level of the
base support bars, replace the brushroll
assembly.
BRUSHROLL SERVICING
Worn Brushes
Base
Support
Bar
- 22 -
TO REPLACE BRUSHROLL ASSEMBLY
1. Remove the floor brush from the
PowerMate .
®
2. Remove PowerMate cover, belt and
brushroll assembly. See "To Remove Belt" in
BELT CHANGING AND BRUSHROLL
CLEANING (page 20).
3. Install new brushroll assembly.
4. Reinstall belt and PowerMate
"To replace belt" in BELT CHANGING AND
BRUSHROLL CLEANING (page 21).
NOTE: See REPLACEMENT PARTS for part
number and purchase details (page 5).
®
cover. See
®