Publicidad
Idiomas disponibles
Idiomas disponibles
2. Installation and setup
EN
2.5. Battery kit assembly (optional)
Notice: Please assemble battery kit first before installing it inside of UPS. Please select correct battery kit procedure below to
assemble it.
2-battery kit:
Step 1
Tapes
Remove adhesive tapes.
4-battery kit:
Step 1
Tape
Remove adhesive tapes.
6-battery kit:
Step 1
Tape
Remove adhesive tapes.
42
PH 9310 | PH 9315 | PH 9320 | PH 9330
Uninterruptable Power Supply
Step 2
Connect all battery
terminals by following
upper chart.
Step 2
Connect all battery
terminals by following
upper chart.
Step 2
Connect all battery
terminals by following
upper chart.
Step 3
Put assembled battery packs
on one side of plastic shells
and insert one more defect
battery on the space.
Step 3
Put assembled battery packs
on one side of plastic shells.
Step 3
Put assembled battery packs
on one side of plastic shells.
Step 4
Cover the other side of
plastic shell as below
chart. Then, battery kit is
assembly well.
Step 4
Cover the other side of
plastic shell as below
chart. Then, battery kit is
assembly well.
Step 4
Cover the other side of
plastic shell as below
chart. Then, battery kit is
assembly well.
Segurança e harmonia
ININTERRUPTA
Publicidad
