Milwaukee 2607-20 Manual Del Operador página 49

AS AN AID TO REASSEMBLY, TAKE NOTICE
OF WIRE ROUTING AND POSITION IN
WIRE GUIDES AND TRAPS WHILE
DISMANTLING TOOL.
BLACK
3
RED
3
BLACK
CONNECTOR
BLOCK
BE CAREFUL AND AVOID PINCHING WIRES
BETWEEN HANDLE HALVES WHEN
ASSEMBLING.
SERVICE NOTE:
ORIGINAL DESIGN MODULE
#13 AND NEW DESIGN MODULE
#13 ARE INTERCHANGEABLE
COMPONENTS OF SWITCH
ASSEMBLY #9. THE ORIGINAL
DESIGN MODULE #13 IS NO
LONGER AVAILABLE AS A
REPLACEMENT PART.
Wire Wire Origin or
No.
Color Gauge
1 Red 22-18-1121
2 Black 22-18-1126
3 Red 23-66-1001
4 Black 23-66-1001
5 RED 23-66-1001
6 Red 23-66-1001
7 Black 23-66-1001
8 Black 23-66-1001
*
Switch Assy. No. 23-66-1001 consists of Switch, Connector Block and FET Module & associated wires.
RED 1
SWITCH
2
FET
MODULE
RED 6
7
8
BLACK
4
5
Original design
module #13
Switch #10, FET Module #13 and Battery
Connector Block #14 are all components of
Switch Assembly #9 (23-66-1001)
WIRING SPECIFICATIONS
Length Terminals, Connectors and 1 or 2 End Wire Preparation
----- Carbon Brush Assembly - Top.
----- Carbon Brush Assembly - Bottom.
----- Component of the *Switch Assembly.
----- Component of the *Switch Assembly.
----- Component of the *Switch Assembly.
----- Component of the *Switch Assembly.
----- Component of the *Switch Assembly.
----- Component of the *Switch Assembly.
BLACK
RED
New design
module #13
SWITCH
1
2
1
2
4
5 3
B+ DP
BATTERY
CONNECTOR
BLOCK
MOTOR
FET
MODULE
M DP DC
7
6 8
DC B-