Samsung CM1919 Manual De Instrucciones página 133

INSTALLATION INSTRUCTIONS FOR STACKING
Important
1. Disconnect the power cord from the wall socket before attempting
installation.
2. For stacking installation, you must use the "bracket plate" which is
enclosed with this unit.
3. The maximum stacking height is two units.
Stacking the two units is limited to the following models.
CAUTION :
Be sure the oven cavity is empty.
Installation
1. Stack two units together.
2. Remove 6 screws as shown in the figure.
3. Place the Bracket-plate to join the two units.
4. Attach and tighten 6 screws as shown in the figure here.
5. Ensure the top oven is at a safe and workable height.
Bracket-Plate
CM1519A_XEU_04029B-02_EN.indd 13
REPLACEMENT OF LAMP
Important
1. Remove a screw securing the lamp cover.
You don't need to remove outer panel to replace lamp.
2. Remove the lamp by rotating it clockwise.
3. Replace with a new lamp by rotating it counter-clockwise.
Screw
13
Lamp
Lamp Holder
Cover
Lamp
(230V 25W)
Outer
Panel
11/5/2015 9:05:41 AM