Publicidad
EB 400
BATTERIES
The battery for riveting tool EB 400 may be recharged several times, for a longer life and full power yield.
•
Store the battery in a safe, dry place.
•
If the battery structure is damaged, replace it with a new one.
•
Do not short-circuit the contacts, which may cause fire and explosions. Be careful to avoid skin contact if the battery leaks
fluid.
In case of:
1)
Accidental skin contact, wash the area thoroughly with soap and water and con tact a doctor immediately.
2)
Accidental eye contact, rinse eyes with abundant running water for at least 10 minutes. Contact a doctor immediately.
•
Do not use any battery model other than the one provided.
•
Make sure the outer surfaces of the battery are clean and dry before inserting it in the battery charger.
Use only the battery charger supplied by FAR to avoid electric sparks, overheating or battery fluid leakage.
•
•
Batteries may be harmful to the environment and may explode. Do not attempt to open them. Do not expose to fire or other
sources of heat.
Do not burn. Do not throw out in the environment.
•
Dispose of batteries according to current regulations in your country.
•
The user is directly responsible for proper disposal of batteries.
Revision - 02
GB
Date 05-2017
21
Publicidad
