Publicidad
Enlaces rápidos
DMF215
INSTRUCTION MANUAL
Para Español ver página 20
Want to watch
a video that
DMF215
shows how
easy this DIY
project will be?
Watch it now at:
SANUS.com/2888
WE'RE HERE TO HELP
Recommended placement
Check it out at:
SANUS.com/1174
Get it right the
first time.
HeightFinder™
shows you
where to drill.
Call us at:
888-333-9952
Our US-based
install experts
are standing
by to help.
Publicidad
Manuales relacionados para Sanus DMF215
Resumen de contenidos para Sanus DMF215
- Página 1 DMF215 INSTRUCTION MANUAL Para Español ver página 20 WE’RE HERE TO HELP Want to watch Get it right the Our US-based Recommended placement a video that first time. install experts DMF215 shows how HeightFinder™ are standing easy this DIY shows you by to help.
- Página 2 Before getting started, let’s make sure this mount is perfect for you! Does your TV No — Perfect! (including accessories) 50 lbs. Yes — This mount is NOT compatible. Visit MountFinder.sanus.com or call weigh more than (22.6 kg) 50 lbs. (22.6 kg) ? 1-888-333-9952 to find a compatible mount.
- Página 3 Dimensions TV INTERFACE 3.94in 15.75in 100mm 400mm 7.87in 200mm 11.81in 300mm .34in 8.7mm WALL PLATE TOP VIEW - EXTENDED SIDE VIEW - EXTENDED 2.91in 4.02in 5deg 74mm 102mm 15deg .99in .33in 25.2mm 8.4mm 9.06in 45deg 45deg 230mm 8.27in 210mm 15.0in 381mm ROLL CONTROL TOP VIEW - RETRACTED...
- Página 4 Supplied Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
- Página 5 STEP 2 Parts and Hardware STEP 2B: Concrete Installation Kit CMK1 [NOT INCLUDED] Contact Customer Service at 1-888-333-9952 to have these additional pieces shipped directly to you. Lag Bolt 5/16 x 2¾ in. Concrete Anchor Fischer UX10 x 60R Anchor Lag Bolt Wall Plate Full Motion Arm...
- Página 6 STEP 1 Attach Faceplate to TV 1.1 Measure Your TV Hole Pattern 1.2 Assemble Your Faceplate Based on your TV hole pattern measurements Measure the width and height of your TV ), determine your Faceplate hole pattern in mm. configuration: A, B, C, D or E. Record your measurements: For TV Hole Pattern Measurements...
- Página 7 For TV Hole Pattern For TV Hole Pattern For TV Hole Pattern Measurements Measurements Measurements (Dimensions in mm) (Dimensions in mm) (Dimensions in mm) 400 x 300 200 x 300 300 x 200 200 x 400 400 x 200 [15¾ in.] [15 ¾...
- Página 8 1.3 Select TV Screw Diameter 1.4 Select TV Screw Length Standard configurations are shown. For special Test the four TV screw diameters (M4, For flat-back TVs, Spacers supplied for: applications, or if you M6, and M8) in the threaded inserts on are uncertain about your no spacers the back of your TV to determine which...
- Página 9 1.5 Attach TV Bracket Position your TV bracket configuration (A, B, C, D or E) onto your TV, making sure the bracket is both centered and level over your TV hole pattern. NOTE: The hanging tab on faceplate must be oriented toward the top of the TV. Secure the TV bracket using your selection: screw/washer or screw/washer/spacer.
- Página 10 STEP 2A Attach Wall Plate to Wall Wood Stud Installation CAUTION: Avoid potential personal injury or property damage! ● Drywall covering the wall must not exceed 5/8 in. (16 mm) ● Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1 ½ x 3 ½ in. (38 x 89 mm) Locate your stud.
- Página 11 Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove template IMPORTANT: Be sure to drill into the center of the stud. IMPORTANT: Pilot holes must be drilled to a depth of 2 ¾ in. (70 mm). 4.
- Página 12 STEP 2B Attach Wall Plate to Wall Solid Concrete / Concrete Block Installation CAUTION: Avoid potential personal injury or property damage! Concrete Installation Kit CMK1 is not included (see page 5) Contact Customer Service ● Mount wall plate assembly directly onto concrete surface (no wall covering) at 1-888-333-9952 to have the additional ●...
- Página 13 Remove the template and insert two anchors (Fischer UX 10 x 60R - included in the Concrete Installation Kit CMK1*). CAUTION: Be sure the anchors are seated flush with the concrete surface. Install full motion arm using two lag bolts .
- Página 14 STEP 3 Hang TV onto Wall Plate HEAVY! You may need assistance with this step. Install the nut cap on wall plate assembly Fold first section of the arm of full motion arm against the wall to provide stability.
- Página 15 Hang the TV onto the arm of full motion arm by first hooking the hanging tab , then resting the TV into place. Lock the TV to the full motion arm with locking screw and washer IMPORTANT: This locking screw must be installed to secure the TV onto the full motion arm...
- Página 16 Manage Cables Fully extend the arms before routing cables. Route the cables through the channels on the top and bottom of the arm for a cleaner look.
- Página 17 TV Adjustments TILT ADJUSTMENT LEVEL ADJUSTMENT To adjust the leveling of your TV, loosen the locking screw , level Your TV should adjust easily when moved, then stay in place. your TV, then tighten locking screw If your TV is too loose or too tight, adjust the tilt tension knob by hand. IMPORTANT: This locking screw must be installed to secure NOTE: Once your TV is in place, tighten the tilt tension knob to...
- Página 18 REMOVING THE TV HEAVY! You may need assistance with this step. Disconnect the cables from your TV. Remove locking screw Carefully lift your TV up and off of wall plate assembly...
- Página 19 ¿Su televisor pesa No — ¡Perfecto! más de 22.6 kg 22.6 kg , incluidos (50 libras) Sí — Este soporte NO es compatible. Visite Mountfinder.Sanus.com o llame al 1-888-333-9952 para (50 lb) los accesorios? encontrar un soporte compatible. ¿Tabiques ¿De qué está...
- Página 20 ESPAÑOL Dimensiones Ver página 3 Piezas y accesorios suministrados Ver página 4 ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor;...
- Página 21 ESPAÑOL 1,5 Fije la placa de sujeción Coloque su configuración de soporte de televisor (A, B, C, D o E) sobre el patrón de orificios de su televisor, asegurándose de que el soporte esté centrado sobre el patrón de orificios del televisor y nivelado. NOTA: La lengüeta colgante del soporte del televisor debe estar orientada hacia la parte superior del televisor.
- Página 22 Ver página 12 ESPAÑOL PASO 2B Fijar la placa mural Hormigón sólido o bloques de cemento PRECAUCIÓN: Evite lesiones y daños materiales. El Kit de instalación en hormigón CMK1 no está incluido ● (Ver página 5) Instale el módulo de la placa mural directamente sobre la superficie de hormigón Comuníquese con el servicio de atención ●...
- Página 23 ESPAÑOL Organización de cables Ver página 16 Los cables pueden pasarse por los canales para cables que se encuentran en la parte superior del brazo del módulo de la placa mural para un aspecto más prolijo. Pase los cables alrededor del poste del brazo y a través del área abierta del brazo, tal como se muestra en la imagen, para evitar aplastar los cables al plegar el brazo.
- Página 24 Thank you for choosing SANUS! Please take a moment to let us know how we did: Call us: 1-888-333-9952 Decora.SANUS.com Legrand AV Inc. and its affiliated corporations and subsidiaries (collectively, “Legrand”), intend to make this manual accurate and complete. However, Legrand makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product.