LG VR182CE Manual Del Propietário página 14

ADVANCED FUNCTIONS
14
Indoor air purification
Auto Clean operation
In the cooling and dehumidifying operations,
moisture is generated inside the indoor unit.
Use the auto cleaning function to remove
such moisture.
|
1
Press to turn on the power.
2
Press .
J
- is displayed on the display screen.
- If you turn off the power, the fan oper-
ates for 30 minutes and cleans the inside
of the indoor unit.
NOTE
!
Some buttons cannot be used while the
auto cleaning function is in operation.
Auto operation
(Artificial intelligence)
Cooling-only models
In this mode, the fan speed and the tempera-
ture adjust automatically, based on the room
temperature.
|
1
Press to turn on the power.
q
2
Press repeatedly to select auto opera-
tion.
G H
3
Press or to select the desired oper-
ation code if the temperature is higher or
lower than the desired temperature.
NOTE
!
• In this mode, you cannot adjust the fan
speed, but you can set the air deflector
to rotate automatically.
• This function may not be supported, de-
pending on the model.
Auto Changeover operation
This mode changes the operation mode auto-
matically to maintain the set temperature
at ±2°C
|
1
Press to turn on the power.
q
2
Press repeatedly to select the auto
changeover operation.
C
- is displayed on the display screen.
G H
3
Press or to set the desired temper-
ature.
- The temperature range is 18°C(64°F) –
30°C(86°F)
r
4
Press repeatedly to select the fan
speed.
NOTE
!
This function may not be supported,
depending on the model.
Code Description
2 Cool
1 Cool slightly
0 Maintain
room
temperature
-1 Heat slightly
-2 Heat