Publicidad
Secondary Filter
Screen
Filtre secodaire
Malia secundaria
Removing Clogs
If the vacuum cleaner does not seem to
have adequate suction, first check if the
dust bin is full or if a filter is clogged.
Check the hose area.
Remove extension hose by grasping
the hose collar, twisting, and pulling
straight off.
Visually inspect the hose and the
base area into which the hose is
connected.
Remove any visible clog.
Re-connect the extension hose to the
dust bin port assembly.
Plug in the vacuum cleaner and turn it
on.
Stretch the hose to maximum length
and then allow the hose to return to its
storage length.
Turn the unit off and unplug the unit.
Remove dust bin and check
secondary filter screen for clogs.
If the dust bin and filter areas and the
hose areas are free of clogs, check
the nozzle area.
Return the vacuum cleaner to the
upright position before plugging into
an electrical outlet.
- 50 -
Publicidad
