Cole-Parmer RS-200 Serie Manual De Instrucciones página 6

Maintenance & Servicing
WARNING: Ensure the unit is disconnected
from the mains electricity supply before
attempting maintenance or servicing.
Periodically clean the instrument using a damp
cloth and mild detergent solution. Do not use
harsh or abrasive cleaning agents.
Any repairs or replacement of parts MUST be
undertaken by suitably qualified personnel.
For a comprehensive list of parts required by
service engineers conducting internal repairs,
please contact the Service Department, quoting
both the model number and serial number:
E-mail: cpservice@antylia.com
Tel: +44 (0)1785 810475
Only spare parts supplied or specified by
Cole-Parmer or its agents should be used.
Fitting of non-approved parts may affect the
performance of the safety features designed
into the instrument.
If in any doubt, please contact the Technical
Service Department of Antlia Scientific or the
point of sale.
Technical Specification
Number of rollers
Speed
Amplitude
Maximum load
Controls
Timer
Roller size
(length x diameter)
Overall dimensions
(w x d x h)
Net weight
Electrical Supply
6
RS-200
6
33rpm
16mm
3kg
Analogue
No
340x30mm
595x255x110mm
5.6kg
230V, 50/60Hz
or
120V, 50/60Hz
For any other technical enquiries, please contact
the Technical Support Department:
E-mail: cptechsupport@antylia.com
Tel: +44 (0)1785 810433
Spares and Accessories
The following spares and accessories are available
from your laboratory dealer.
Description
Stacking system
RS-200D
6
5 to 60rpm
16mm
3kg
Digital
Yes
340x30mm
595x255x110mm
5.7kg
230V, 50/60Hz
or
120V, 50/60Hz
Catalogue Number
SRT/STACK
RS-200-L
9
33rpm
16mm
3kg
Analogue
No
340x30mm
595x375x110mm
7.5kg
230V, 50/60Hz
or
120V, 50/60Hz
RS-200D-L
9
5 to 60rpm
16mm
3kg
Digital
Yes
340x30mm
595x375x110mm
7.6kg
230V, 50/60Hz
or
120V, 50/60Hz