Descargar Imprimir esta página

Pioneer AVH-A215BT Manual De Instrucciones página 14

Publicidad

Idiomas disponibles

Idiomas disponibles

Displays the hidden function bar.
Searches for the part you want to play.
Touch [Title], [Chapter], [10Key], or [Track] then input the desired number from [0]
to [9].
To start playback from the number you registered, touch
TIPS
• To cancel an input number, touch [C].
• For DVD-Videos, you can select [Title], [Chapter] or [10Key].
• For Video-CDs, you can select [Track] or [10Key].*
Selects the audio output from [L+R], [Left], [Right], [Mix].
This function is available for Video-CDs and DVDs recorded with LPCM audio.
Changes the viewing angle (Multi-angle).
This function is available for DVDs featuring multi-angle recordings.
Resumes playback (Bookmark).
This function is available for DVD-Video. You can memorise one point as a
Bookmark for a disc (up to five discs). To clear the bookmark on the disc, touch and
hold this key.
Returns and begins playback from the specified point.
This function is available for DVD-Video and Video-CDs featuring PBC (playback
control).
* PBC (playback control) only
Compressed files
Inserting and ejecting media
You can play compressed audio, compressed video, or still image files stored in a disc or
an external storage device.
CAUTION
Do not insert anything other than a disc into the disc-loading slot.
Inserting a disc
1
Insert a disc into the disc-loading slot.
The source changes and then playback will start.
14
En
NOTE
If the disc is already set, select [Disc] as the playing source.
Ejecting a disc
1
Press
.
Plugging a USB storage device
1
Pull out the plug from the USB port of the USB cable.
2
Plug a USB storage device into the USB cable.
TIP
Connect the USB cable to the USB port on the rear panel of this product.
NOTES
• This product may not achieve optimum performance with some USB storage devices.
• Connection via a USB hub is not possible.
• A USB cable is required for connection.
Unplugging a USB storage device
1
Pull out the USB storage device from the USB cable.
NOTES
• Check that no data is being accessed before pulling out the USB storage device.
• Turn off (ACC OFF) the ignition switch before unplugging the USB storage device.
Starting procedure
For Disc
1
Insert the disc (page 14).
TIP
If the disc is already set, select [Disc] as the playing source.
For USB
1
Plug the USB storage device into the USB cable (page 14).
.

Publicidad

loading