Publicidad
Idiomas disponibles
Idiomas disponibles
M i c r o C a r r i e r S t i r r e r
OPERATION
•
Reference must be made to chemical manufacturer's
instructions for the preparation of the culture medium and cell
culture techniques.
•
The MCS-104L may be used with a water bath, MWB-12L, and
this is described in a separate leaflet.
•
Place the primed culture vessels in position over the location
bosses on the platform.
•
Set the "rpm" control to the required speed.
•
Set the "interval/continuous" switch for periodic or continuous
stirring as required.
•
If interval stirring is selected, set the stirring periods to the on/off
stirring times required.
•
Switch on to start the attachment phase.
•
At the end of the attachment phase, reset the interval/continuous
switch and the stirring time controls as appropriate for the growth
phase.
•
At the end of the growth phase switch off and allow the stirrer to
stop before removing the vessels.
O P E R A T O R ' S M A N U A L
P A G E 25
Publicidad
