Publicidad
Idiomas disponibles
Idiomas disponibles
18
side burner maintenanCe
m warninG: all gas controls and supply valves should be in
the "off" position.
Make sure black wire is connected between the igniter and electrode.
Make sure white wire is connected between the igniter and grounding clip.
Spark should be a white/blue color, not yellow.
1)
Igniter Wire
2)
Ground wire
3)
Burner
weber
spider/inseCt sCreens
®
Your Weber
gas barbecue, as well as any outdoor gas appliance, is a target for spiders
®
and other insects. They can nest in the venturi section (1) of the burner tubes. This
blocks the normal gas flow, and can cause the gas to flow back out of the combustion
air opening. This could result in a fire in and around the combustion air openings, under
the control panel, causing serious damage to your barbecue.
The burner tube combustion air opening is fitted with a stainless steel screen (2) to
prevent spiders and other insects access to the burner tubes through the combustion air
openings.
we recommend that you inspect the spider/insect screens at least once a year.
(see section "annual maintenance".) also inspect and clean the the spider/insect
screens if any of the following symptoms should ever occur:
1)
The smell of gas in conjunction with the burner flames appearing yellow and lazy.
2)
Barbecue does not reach temperature.
3)
Barbecue heats unevenly.
4)
One or more of the burners do not ignite.
m danGer
failure to correct the above mentioned symptoms may result
in a fire, which can cause serious bodily injury or death, and
cause damage to property.
side burner maintenanCe
side burner Grate
side burner cap
side burner ring & head
igniter electrode
Control Knob
igniter
maintenanCe
www.weber.com
®
Publicidad
