NOTE :
- Some browsers will treat 192.168.1.1 as a search, so make sure you include http:// header.
- Recommended browsers, such as the latest version of Chrome, Safari, Edge, Firefox or
Opera.
SETUP THE WEATHER SERVER CONNECTION
Enter the following information into the below web interface "SETUP" page. If you choose not
to use Wunderground.com or Weathercloud.net, leave the check boxes unchecked.
Press "SETUP" icon
to SETUP page
Press to search router
Press to allow add
router manually
Password record remark
(If you entered password)
Current ID and key recorded
(if any)
Current ID and key recorded
(if any)
NOTE:
- When WI-FI setup is complete, your PC or mobile will resume your default WI-FI connection.
- During AP mode, you can press and hold the [ SENSOR / WI-FI ] key for 6 seconds to stop
AP mode and the console will restore your previous setting.
WI-FI CONNECTION STATUS
Below is the WI-FI icon status on the console LCD:
Stable: Console is in
connection with WI-FI router
TIME SERVER CONNECTION STATUS
After the console has connected to the internet, it will attempt to connect to the internet time
server to obtain the UTC time. Once the connection succeeds and the console's time has been
updated, the "
SETUP
WiFi Router setup
Search
Router:
ROUTER_A
Add Router
Security type:
WAP2
Router Password:
******
Weather server setup
Wunderground
Station ID:
WDw124
Station key:
******
Weathercloud
Station ID:
IPACIR23Wc
Station key:
******
Mac address
00:0E:C6:00:07:10
Time server setup
nist.time.gov
Server URL:
Function firmware version: 1.00
WiFi firmware version: 1.00
SETUP page
Flashing: Console is trying to
connect to WI-FI router
" icon will appear on the LCD.
Language:
English
ADVANCED
Apply
13
Select the Wi-fi router (SSID) you will connect to
Manually enter the SSID if not on the list
Select router's security type (usually WAP2)
Router's password (leave blank if unsecured)
Check to confirm upload to Weather underground
Enter new Station ID and Station key
assigned by W undeground
Check to confirm upload to Weathercloud
Enter new Station ID and Station key
assigned by Weathercloud
Select time server
Press to complete the setting
Flashing: Console currently in
Access Point (AP) mode