Publicidad
Idiomas disponibles
Idiomas disponibles
English
14
5 min.
1. Fill a household pot
with enough water to
cover all parts and
place all parts in the
pot. Let the water boil
for 5 minutes. Make
sure the parts do not
touch the side of the
pot.
Using the breast pump
Flange size
The Philips Avent single/double electric breast pump Advanced has a soft, active flange. There is
only one flange size. It gently stimulates your nipple to trigger milk flow. The flange is made of
flexible silicone, fitting nipple sizes up to 30 mm/1.18 in.
Assembling the breast pump
Make sure you have cleaned and disinfected the parts of the breast pump that come into contact
with milk.
Warning: Be careful, when you have disinfected the breast pump parts by boiling
them, they can be very hot. To prevent burns, only start assembling the breast pump
when disinfected parts have cooled down.
Warning: Wash your hands thoroughly with soap and water before you touch breast
pump parts and breasts to prevent contamination. Avoid touching the inside of
containers or lids.
Caution: Before each use, visually inspect the individual components for cracks, chips,
tears, discoloration or deterioration. In the event that damage to the device is observed,
discontinue use until the parts have been replaced.
2. Allow the water to
cool down.
3. Gently remove the
parts from the water.
Place the parts on a
clean surface/tea
towel or drying rack to
air-dry.
4. Store the dry items
safely until needed.
Ensure the clean pump
parts, bottle brushes
and wash bowls have
air-dried thoroughly
before storing. Items
must be completely
dry to help prevent
germs and mold from
growing. Store the dry
items in a clean,
protected area.
Publicidad
