Publicidad
Idiomas disponibles
Idiomas disponibles
Caution: Inspect the tubing. If you find condensation in the air tube, wash and dry it
immediately or replace the tubing. If you see breast milk inside the tubing or tubing
connector, do not attempt to wash, clean or disinfect the tubing or tubing connector.
Instead, contact the manufacturer.
Note: Correct placement of the flange, silicone diaphragm and silicone tube is essential for the
breast pump to form a proper vacuum.
1. Wash your hands
thoroughly with soap
and water.
5. Place the silicone
diaphragm in the
pump body.
9. Insert the adapter
into the power outlet
and insert the small
plug at the other end
into the motor unit.
2. Push the white valve
in the pump body as
far as possible.
6. Make sure that the
silicone diaphragm fits
securely around the
rim by pressing it down
with your thumbs.
10. The breast pump is
now ready for use.
3. Screw the pump
body onto the bottle.
7. Attach the silicone
tube and cap onto the
diaphragm. Push down
the cap until it is
securely in place.
Note: You can place
the cover over the
flange to keep the
breast pump clean
when you take it with
you and while you
prepare for expressing.
English
4. Screw the flange
onto the pump body.
8. Connect the tube(s)
to the motor unit.
15
Publicidad
