LG LSXC22336 Serie Manual Del Propietário página 12

12 INSTALLATION
Ambient Temperature
Install this appliance in an area where the
temperature is between 55°F (13°C) and 110°F
(43°C). If the temperature around the appli-
ance is too low or high, cooling ability may be
adversely affected.
Measuring the Clearances
Too small of a distance from adjacent items
may result in lowered freezing capability and
increased electricity consumption charges.
Allow at least 24 inches (61 cm) in front of the
refrigerator to open the doors, and at least
2 inches (5.08 cm)
between the back of the refrigerator and the
wall as well as on the sides of the refrigera-
tor and adjacent walls or objects.
24" (61 cm)
2" (5.08 cm)
Replacement of lamp
The refrigerator compartment lamp is a LED
interior lighting, so maintenance must be
performed by a qualified technician.
Removing/Assembling the
Refrigerator Door Handles
NOTE
When it is necessary to move the refrigerator
through a narrow opening, removing the
doors is the recommended procedure. If it
is necessary to remove the handles, follow
the directions below. The appearance of the
handle may vary from what is shown in the
illustrations
Removing the Handles
1
Loosen the set screws with a 3/32 in. Allen
wrench and remove the handle.
2
Loosen the mounting fasteners that connect
to the refrigerator door and handle using a
¼ in. Allen wrench, remove the mounting
fasteners.
Mounting
Fasteners
Assembling the Handles
1
Assemble the mounting fasteners at both
ends of the handle using a ¼ in. Allen
wrench.
2
Place the handle on the door by fitting
the handle footprints over the mounting
fasteners and tightening the set screws
with a 3/32 in. Allen wrench.
Mounting Fasteners
Set Screw
Allen Wrench